Beer Keg Taps-A Guide The beer keg is usually seen in parties or picnics especially with your family and friends. Individuals who feel really thirsty need to drink a lot and so keg will save you a bit of cash as it is affordable. A keg tap is a device that facilitates the release of beer into your drinking cup from the keg. It’s not a difficult move to make but you have to take caution if you do not understand how to get it done right as you may waste the beer. Foam may splash on your face or all around you if you are doing it in the wrong manner. You may see some beer is poured by folks readily nonetheless it isn’t as easy as it looks. The main purpose of the keg tap is to release the beer. A lever can be used, and by pressing and pulling it, the beer is released. It works by releasing the pressure which then pushes the beer up and into the container or glass. The keg tap works just like a switch and may be an open/close or an on/off switch. When trying to connect the keg with the tap, place the keg tap directly in front of you and put it in a steady position for some time to minimize the foam it makes when pouring. By transporting the keg, the froth is built up especially when there is a lot of motion. Allow it to stay for some time and put the keg where you intend to serve the beer to reduce the foam. Remove the seal or cap as it is more difficult to tap with these still on it. But, the experts don’t take away the seal or cap because they are great at it and won’t put the beer at risk as you will.
Overwhelmed by the Complexity of Kegs? This May Help
Connect the tap and the line with the hole that lies top of the keg. There are some open slits and a ball bearing when you connect the tap to the keg. The ball bearing functions as a stopper and the slits hold the tap in position. Before you need to do anything, make sure to push down the ball bearing. You will require a little strength to push it down so that the beer may flow. Slide the tap in a clockwise manner while exerting some pressure down. If you do not have that downward pressure, the pressure will build up in the keg and will push the tap out of the way. Therefore, keep shoving it down as you keep the tap in the proper place or you need to keep the downward pressure. When you turn the faucet you lock it and afterwards, you can pour some cups of beer to discard any foam.Overwhelmed by the Complexity of Kegs? This May Help